How to Install a Lifefield Polarizer in Your Home or Office
Installing a LifeField Polarizer is really no more than putting a plug into a socket. The question we get far more often is a different one: which socket? And do you need one, or more? That is what this piece is about.
What's inside the case
A LifeField Polarizer is a small round case with a plug. Inside are a copper ring, a polarizer plate and a combination of crystals. Copper was chosen for the energetic properties that many traditions attribute to it. The polarizer plate is based on the antennas of Georges Lakhovsky. Which crystals are inside varies by model; you can tell the model from the print on the front. Crystals carry their own meaning in many spiritual and holistic traditions, and those traditions are the starting point for how each model is put together. For installation the model makes no difference: it is the same for all of them.
The case uses no electricity. The plug is not there for power but for the wiring. The idea behind the Polarizer is that the copper in your household wiring works along with it like a large antenna. The case has a field of its own even when it is not plugged in, but in a socket it reaches further.
Where do you put it?
Start in the room where you spend the most hours. For most people that is the bedroom, then the living room or the place where they work. Choose a wall socket there, rather than an extension lead or a multi-plug adapter.
What you notice differs from person to person. Our advice is always: start in one room, give it a few weeks, and pay attention yourself to how that room feels to you.
Including more rooms
A Polarizer works along with the wiring of the circuit it is plugged into: the circuits you see in your fuse box. If you would like to include more rooms, check in the fuse box which circuit goes where, and use one per circuit. An older home often has four, a newer one easily eight, a large house sometimes twelve. There is no need to do everything at once. In an ordinary terraced house, two of them, one upstairs and one downstairs, already cover the rooms where you spend most of your time.
Something new every week
We write every week about water, energetic products and frequencies, and about what we come across in practice. No sales talk — just what we have looked into and measured ourselves.
No socket nearby: the Balance with antenna
The LifeField Polarizer Balance has an antenna instead of a plug, and the same crystals as the Stability: tourmaline and rock crystal. You place it on a table, a cupboard or the floor. Handy in a spot without a socket, or where you would rather not plug anything into the wall. People who work with earth rays or ley lines often place it on the spot that came out of that work. Keep it out of reach of children and pets.
For when you are on the move there is the Personal Polarizer, which you carry with you. In a car or on a boat, you place a Polarizer on a metal surface; ask us if you would like to know more about that.
Before you plug it in
A few points from the operating instructions:
- Indoors only, in a dry room, and away from fireplaces, heaters or open flames.
- Do not open the case. Doing so voids the warranty.
- It is fragile. Do not drop it, and keep it out of reach of small children. If it rattles when you unpack it or after a fall, please get in touch with us.
Care
Very little. Dust it now and then with a dry cloth; for a mark, the cloth may be slightly damp. Unplug it first, and only plug it back in once the plug is dry.
Any questions?
You will find all models side by side under LifeField Polarizers, including the Custom Made, where you choose the crystals yourself. Not sure which circuit goes where, or how many you need? Email us at info@meditecheurope.nl and we will gladly help.
Made with