Details

The CopperWave is a copper plate set in a case made of the same material as the housing of the Multiwave Oscillator. It has no cable and is not connected to anything. You place it on the floor within your setup while the MWO is running. The plate is deliberately not grounded: it is not a grounding product.

How the CopperWave came about

We have been working with the Multiwave Oscillator since 2019, and one question kept coming back: the one about copper. Lakhovsky started out with antennas made of pure copper and later combined it with brass and stainless steel, which is how we still build the antennas today. What happens when you extend the setup with a large copper surface, on the floor, between the antennas?

It became a flat plate of copper 1.5 millimetres thick, with slightly rounded corners, lying on the floor between the antennas. Why exactly like this, we will gladly tell you during a demonstration.

The most important choice is that the plate is not grounded. A grounded plate is connected to the earth by a cord; the CopperWave deliberately stands free, which makes it something other than a grounding product. That is why it has no cord and no connection, and the copper sits in a case of the same insulating rigid PVC as the housing of the MWO.

Copper was Lakhovsky's material: he worked with open copper circuits, and copper conducts electricity better than almost any other metal. You can read the whole story in our blog about the CopperWave.

How it is made

Copper plate, 1.5 mm thick, in a case of insulating rigid PVC, the same material as the MWO
Dimensions: 48.5 × 35 × 7 cm
Slightly rounded corners
Weight: 6 kg
Delivery time: expected from early November (pre-order)
No connection, not grounded
For the Meditech Europe Multiwave Oscillator 220/240